1038 Ti-Adam Guidry Road
Arnaudville, LA 70512
(337) 754-5097
Fax (337) 754-7330
Toll Free
866-677-1807
|
1038 Ti-Adam Guidry Road |
|||||
PRR Panel |
|||
 |
R Panel |
|||
 |
Reverse Roll R Panel |
|||
 |
PBM Panel |
|||
 |
M Panel |
|||
 |
Reverse Roll M Panel |
|||
 |
Versi Rib Panel |
|||
 |
Notes |
|||
Galvalume Base Metal Is In Conformance With ASTM A792, Coating Class AZ50 Min. Cutting Charge For Panels Less Than 4' - 0" In Length Is $.75 Per Panel PRR Panel Is Available In Galvalume Plus And Polar White Yield Strength Is 80,000 P.S.I. On 29 And 26 Gauge Panels, 50,000 P.S.I. On 24 Gauge Panels Add $25.00 Set-Up Charge For Reverse Run Panels (Upside Down) Or Quantities Less Than 2 Squares Length Tolerance Is Plus Or Minus 1/4" Of Ordered Length Of All Profiles Galvalume Plus Is Galvalume Coated With A Thin Acrylic Film Intended To Increase Its Resistance To Fingerprinting And Handling Marks And Eliminate The Use Of Oil In The Roll Forming Process This Film Is Not Warranted Maximum 3,000 lbs. Per Bundle, Unless Specified Otherwise By Customer |
Die Formed Ridge Cap For R Panel Specify Slope Note: Die Formed Ridge Cap Is Not Available For Versi Rib Panel |
|||
Part Number |
Max. Length |
Girth |
Wt./Each |
CAPRCL (Color) |
3' - 0" 3' - 0" 3' - 0" |
3' - 0" 3' - 0" 3' - 0" |
7.5# 7.5# 7.5# |
 |
|||
Die Formed Ridge Cap For M Panel Specify Slope Note: Die Formed Ridge Cap Is Not Available For Versi Rib Panel |
|||
Part Number |
Max. Length |
Girth |
Wt./Each |
CAPMCL (Color) |
3' - 0" 3' - 0" 3' - 0" |
3' - 0" 3' - 0" 3' - 0" |
7.5# 7.5# 7.5# |
 |
|||
Ridge Roll |
|||
Part Number |
Max. Length |
Girth |
Wt./Ft. |
RR-14 |
20' - 6" |
13 15/16" 20 7/8" 37" 41 9/16" |
.836# 1.252# 2.220# 2.49# |
 |
|||